N30 (P, O, U, H)是一個數字面板儀表。
N30 (P, O, U, H)是一個數字面板儀表。
N30 (P, O, U, H) is a digital panel meter.
N30 (P, O, U, H)是一個數字面板儀表。
產品資料:
n30h
Features
? Measurement of single-phase network parameters: voltage, current,
active, reactive and apparent power, cos, frequency, active, reactive and
apparent energy, 15 minutes active power, 10 minutes voltage, 10 seconds
frequency
? Three-colour display (14mm high), in three intervals of the measured
value
? Meter programming from the keyboard or through the RS-485 interface by
means of the free delivered LP config program
? Four alarm outputs with signalling by LED diodes, operating in 6
different modes
? Storage of minimal and maximal values for all measured quantities
? Conversion of any measured value into a 0/4…20mA or 0…10V analogue signal
? Storage of minimal and maximal values for all measured quantities
? Firmware updating (option)
特性
?單相網絡參數的測量:電壓、電流、有功、無功和視功率、cos、頻率、有功、無功、表觀能、15分鐘有功功率、10分鐘電壓、10秒頻率。
?三色顯示(14毫米高),在測量值的3個區間內。
?通過免費的LP配置程序,從鍵盤或通過RS-485接口編程。
?四種報警輸出,由LED二極管發出信號,操作6種不同的模式。
?所有測量量的最小和最大值的存儲。
?任何測量值轉化為0/4…20 ma或0…10 v模擬信號
?所有測量量的最小和最大值的存儲。
?固件更新(選項)